JUMO tecLine H2O2 and PAA

The membrane-covered, amperometric sensors measure the concentration of hydrogen peroxide or peracetic acid in aqueous solutions. Typical application areas include electroplating plants, dairies, swimming pools, and the chemicals industry.

Categories: Electrodes/sensors, Liquid analysis

Technical data
Downloads

Technical data

General technical data
Measuring range	Hydrogen peroxide: max. 0.05 to 20000 mg/l (analog), max. 0.05 to 200000 mg/l (digital); peracetic acid: 0.05 to 20000 mg/l (analog and digital)
Measuring principle	Membrane-covered, amperometric two-electrode system with integrated electronic components
Inflow speed	Approx. 15 cm/s
Response time	Hydrogen peroxide: approx. 5 to 10 minutes; peracetic acid: approx. 5 minutes at 10 °C
Operating temperature	0 to 45 °C
Settling time	Hydrogen peroxide: approx. 3 hrs for initial startup; peracetic acid: approx. 1 hr for initial startup
pH value area of application	Hydrogen peroxide: pH 2 to pH 11; peracetic acid: pH 1 to pH 6
Application areas	Drinking water, swimming pool water, service water

General technical data

Measuring range

Hydrogen peroxide: max. 0.05 to 20000 mg/l (analog), max. 0.05 to 200000 mg/l (digital); peracetic acid: 0.05 to 20000 mg/l (analog and digital)

Measuring principle

Membrane-covered, amperometric two-electrode system with integrated electronic components

Inflow speed

Approx. 15 cm/s

Response time

Hydrogen peroxide: approx. 5 to 10 minutes; peracetic acid: approx. 5 minutes at 10 °C

Operating temperature

0 to 45 °C

Settling time