Lockable isolation 3/2-way valves Series MD
Ports with interchangeable cartridges: threaded (1/8, 1/4, 3/8) or integrated with super-rapid fitting for tube with Ø 6, 8 and 10 mm
Modular
Manual, electro-pneumatic, servo-pilot and pneumatic control
Modular
Manual, electro-pneumatic, servo-pilot and pneumatic control
The Series MD offers multi-sector solutions that ensure saving in terms of installation time, space and costs.
Series MD lockable isolation valves allow the inlet and exhaust of compressed air from the plant and can meet several application requirements.
Series MD lockable isolation valves allow the inlet and exhaust of compressed air from the plant and can meet several application requirements.
The electric version can be equipped with different options of manual override (Push & Turn, Push-in, retaining lever).
Moreover, a version without override is also available.
The manually operated valve can be locked thanks to the use of padlocks.
General Data
| Construction | Modular, compact, spool-type |
| Materials | See table of materials on the following page |
| Ports | With interchangeable cartridges: 1/8, 1/4 and 3/8 threaded, integrated with super-rapid fitting for tube with Ø 6, 8 and 10 mm |
| Fixing | In-line; Wall-mounting by means of through holes in the body or with a support bracket; Panel-mounting (for manually operated version only) |
| Operating temperature | -5°C ÷ 50°C up to 16 bar |
| Operating pressure | Manual valve: -0.8 bar ÷ 10 bar Electro-pneumatic valve: 2 bar ÷ 10 bar Servopilot or pneumatic valve: -0.8 bar ÷ 10 bar (with pilot 2 ÷ 10 bar) |
| Nominal flow | See flow diagrams on the following pages |
| Nominal exhaust flow at 6 bar with ∆p = 1 bar | 850 Nl/min |
| Fluid | Compressed air |
Coding Example
| MD | 1 | V | 01 | 1/8 |
| MD | SERIES | |
| 1 | DIMENSION: 1 = 42 mm | |
| V | 3/2-WAY VALVE | |
| 01 | DESIGN TYPE: 01 = lockable manual control 16 = electro-pneumatic control, Push & Turn manual override 16IL = electro-pneumatic control, bistable manual override, lever type |
16IM = electro-pneumatic control, monostable manual override 16IT = electro-pneumatic control without manual override 36 = pneumatic control |
| 1/8 | PORTS (IN – OUT) *: = without cartridges 1/8 = G1/8 1/4 = G1/4 3/8 = G3/8 6 = tube Ø6 8 = tube Ø8 10 = tube Ø10 |
* NOTE: if the inlet (IN) cartridge is different from the outlet (OUT) cartridge, both dimensions shall be indicated.
Example: MD1-V01-1/4-1/8
Example: MD1-V01-1/4-1/8
