Mini-handle valves Series 2
Handle with incorporated micro valve 3/2 NC and NO
Handle with incorporated micro switch
Handle with incorporated micro switch
Manual handle with integrated pneumatic micro valve 3/2 or with an electrical micro switch with single pole changeover contacts.
Rugged construction particularly suited to be incorporated in to other equipment.
Rugged construction particularly suited to be incorporated in to other equipment.
General Data
| Construction | Poppet-type (closed centres) |
| Valve group | Way/pos. 3/2 way NC and NO |
| Nominal diameter Ø [mm] | 2,5 mm |
| Fixing | 2x holes M5 |
| Ports | Push in cartdrige Ø4 |
| Installation | In any position |
| Operating temperature | 0 ÷ +70°C (-20°C with dry air) |
| Operating pressure | 2 ÷ 8 bar |
| Nominal flow rate | Qn 60 Nl/min. (6 bar ∆ p1) |
| Fluid | Filtered air, without lubrication. If lubricated air is used, it is recommended to use ISO VG32 oil. Once applied the lubrication should never be interrupted. |
| Actuating force | at 6 bar 13N |
| Construction | Switch device |
| Electrical connections | 3 wires Ø external 2,2 mm internal section 0,5 length 30 cm NC = black wire NO = blue wire |
| Fixing | 2x holes M5 |
| Mounting | In any position |
| Protection class | IP40 |
| Activation stroke | 2 mm |
| Actuating force | 5 N |
