Valves and solenoid valves Series D VA version
3/2; 2×3/2; 5/2; 5/3-way
With outlets on the body – For individual or manifold assembly
Size 10,5 – 16 – 25 mm
With outlets on the body – For individual or manifold assembly
Size 10,5 – 16 – 25 mm
Camozzi has developed a new series of valves for applications with limited installation space where it is necessary to have the control elements as close to the actuator as possible.
Valves with threads on the body can be used individually or assembled on manifold. The sub-base version allows a better cleaning of the application.
Thanks to the extreme robust aluminium body, the Series D valves guarantee maximum reliability even under difficult operating conditions.
Valves with threads on the body can be used individually or assembled on manifold. The sub-base version allows a better cleaning of the application.
Thanks to the extreme robust aluminium body, the Series D valves guarantee maximum reliability even under difficult operating conditions.
General Data
| Valve construction | Spool- type |
| Valve functions | 3/2 NC/NO; 2×3/2 NC/NO/NC+NO; 5/2; 5/3 CC/CO/CP |
| Materials | Body, spool, bases = AL; end caps = technopolymer; seals = HNBR |
| Ports | M7 – G1/4 – G3/8 |
| Environmental temperature | 0°C min. + 50° C max |
| Medium | Compressed, filtered and non-lubricated air in class [7:4:4] according to ISO 8573-1:2010. In case lubrication should be necessary, only use oils with a maximum viscosity of 32 Cst and the version with external servo pilot. The air quality for the servo pilot should be of class [7:4:4] according to ISO 8573-1:2010. |
| Voltage | 24V DC |
| Voltage tolerance | ± 10% |
| Power consumption | 1W |
| Class of insulation | Class F |
| Protection class | IP65 with EN 175301 C connector (“3” actuation. Ex DIN 43650)* IP65 with M8 connector (“C” actuation)* IP40 with micro connector (“E” actuation)* |
* See coding example.
Coding Example
| D | 1 | E | VA | – | B | P | – | BS |
| D | SERIES | ||
| 1 | SIZE 1 = 10,5 mm 2 = 16 mm 4 = 25 mm | ||
| E | ACTUATION E = Electric (D1 and D2) 3 = Electric 15 mm (D2 and D4) C = Electric with M8 connections (D1 and D2) P = Pneumatic | ||
| VA | COMPONENT VA = Valve with threaded body | ||
| B | TYPE OF SOLENOID VALVE M = 5/2 Monostable B = 5/2 Bistable P = 3/2 NC Q = 3/2 NO C = 2 x 3/2 NC A = 2 x 3/2 NO G = 2 x 3/2 (NC+NO) N = 5/3 CP V = 5/3 CC K = 5/3 CO | SOLENOID VALVE WITH EXTERNAL SERVO-PILOT SUPPLY MZ = 5/2 Monostabile BZ = 5/2 Bistabile PZ = 3/2 NC QZ = 3/2 NO CZ = 2 x 3/2 NC AZ = 2 x 3/2 NO GZ = 2 x 3/2 (NC+NO) NZ = 5/3 CP VZ = 5/3 CC KZ = 5/3 CO | |
| P | TYPE OF MANUAL OVERRIDE P = Push button (not for D4) R = With push and turn device 0 = For P actuation | ||
| BS | CONNECTIONS T = Thread A = Ø4 (D1) fittings 6512 4-M7-M B = Ø6 (D1) fittings 6512 6-M7-M, Ø6 (D2) S6510 6-1/4 C = Ø8 (D2) fittings S6510 8-1/4 D = Ø10 (D4) fittings 6512 10-1/4-M, Ø10 (D4) S6510 10-3/8 E = Ø12 (D4) fittings 6510 12-3/8 F = Ø14 (D4) fittings 6510 14-3/8 | AS = Ø4 (D1) fittings 6512 4-M7-M + silencers 2931 M7 BS = Ø6 (D1) fittings 6512 6-M7-M + silencers 2931 M7, Ø6 (D2) S6510 6-1/4 + 2921 1/4 CS = Ø8 (D2) fittings S6510 8-1/4-M + silencers 2921 1/4 DS = Ø10 (D2) fittings 6512 10-1/4-M + silencers 2921 1/4, Ø10 S6510 10-3/8 + 2921 3/8 ES = Ø12 (D4) fittings S6510 12-3/8 + silencers 2931 3/8 FS = Ø14 (D4) fittings S6510 14-3/8 + silencers 2931 3/8 | The pneumatically operated solenoid valves with external servo-pilot supply with connections from A to F are already equipped with fittings on the pilot ports Ø4 (D1 and D2) 6512 4 – M5 Ø6 (D4) 6512 6 – M5 |
| VERSION 3, through the connector with rectifier bridge 125-571-3, can be used for AC applications (see the connectors at the end of the section) |
Coding Example
| DC | A | 1 | 0 | – | 12 |
| DC | SERIES |
| A | MANIFOLD A = For type VA valves |
| 1 | SIZE 1 = 10,5 mm 2 = 16 mm 4 = 25 mm |
| 0 | BODY TYPE 0 = Body for subbase assembly |
| 12 | N° OF POSITIONS 2 3 4 …16 17 (no D4) 18 (no D4) 19 (no D4) |
Coding Example Manifold with valves and fittings
| DC | A | 1 | E | P | – | MBMXCVB | – | 3BX2AB | – | CSL | – | R |
| DC | SERIES | ||
| A | MANIFOLD WITH VALVES A = For type VA valve | ||
| 1 | SIZE 1 = 10,5 mm 2 = 16 mm 4 = 25 mm | ||
| E | ACTUATION E = Electric (D1 and D2) 3 = Electric with solenoid 15 mm (D2 and D4) C = Electric with M8 connector (D1 and D2) P = Pneumatic | ||
| P | TYPE OF MANUAL OVERRIDE P = Push button (not for “3” actuation) R = With push and turn device 0 = Without manual override (for “P” actuation) | ||
| MBMXCVB | TYPE OF VALVE / SOLENOID VALVE M = 5/2 Monostable B = 5/2 Bistable C = 2 x 3/2 NC A = 2 x 3/2 NO G = 2 x 3/2 (NC + NO) V = 5/3 CC K = 5/3 CO N = 5/3 CP L = Free position X = Additional supply and exhaust Y = Additional supply and exhaust with silencer | SOLENOID VALVE WITH EXTERNAL SERVO-PILOT SUPPLY MZ = 5/2 Monostable BZ = 5/2 Bistable CZ = 2 x 3/2 NC AZ = 2 x 3/2 NO GZ = 2 x 3/2 (NC + NO) VZ = 5/3 CC KZ = 5/3 CO NZ = 5/3 CP | |
| 3BX2AB | CONNECTIONS ON VALVE POSITIONS T = Thread A = Ø4 (D1) Fittings 6512 4-M7-M B = Ø6 (D1) Fittings 6512 6-M7-M C = Ø8 (D2) Fittings S6510 8-1/4 (D2) S6510 6-1/4 D = Ø10 (D2) Fittings 6512 10-1/4-M E = Ø12 (D4) Fittings S6510 12-3/8 (D4) S6510 10-3/8 F = Ø14 (D4) Fittings S6510 14-3/8 L = Free position X = Threaded plate Y = See code D1AVA-Y / D2AVA-Y / D4AVA-Y | The pneumatically operated solenoid valves with external servo-pilot supply with connections from A to F are already equipped with fittings on the pilot ports Ø4 (D1 and D2) 6512 4 – M5 Ø6 (D4) 6512 6 – M5 | |
| CSL | MANIFOLD CONNECTIONS T = Thread (on both sides) C = Fittings on connections 1;3;5 CS = Fittings Ø8 – Silencer 2931 1/8 on supply + silencers on exhausts D = Fittings Ø10 on connections 1;3;5 DS = Fittings Ø10 on supply + silencers on exhausts E = Fittings Ø12 on connections 1;3;5 ES = Fittings Ø12 on supply + silencers on exhausts F = Fittings Ø14 on connections 1;3;5 FS = Fittings Ø14 on supply + silencers on exhausts G = Fittings Ø16 (D4), S6510 16-1/2 GS = Fittings Ø16 on supply + silencers on exhaustsCONNECTION SIDE = Both L = Fittings on the Left (right side covered) R = Fittings on the Right (left side covered) | (D1) 6512 8-1/8-M (D1) 6512 8-1/8-M + 2921 1/8 (D2) S6510 10-3/8 (D2) S6510 10-3/8 + 2921 3/8 (D2) S6510 12 3/8 (D2) S6510 12 3/8 + 2921 3/8 (D4) S6510 14-1/2 (D4) S6510 14-1/2 + 2921 1/2 (D4) S6510 16-1/2 (D4) S6510 16-1/2 + 2921 1/2 | (D2) S6510 8-3/8 (D2) S6510 8-3/8 + 2921 3/8 (D4) S6510 10-1/2 (D4) S6510 10-1/2 + 2921 1/2 (D4) S6510 12-1/2 (D4) S6510 12-1/2 + 2921 1/2 |
| R | FIXING = Direct R = Port for DIN rail (only for D1) | ||
| In case of the same consecutive codes, group them and indicate the total quantity, for example: DCA1EP-MMMYCCVG-BBBYBAAA-CSL-R DCA1EP-3MY2CVG-3BYB3A-CSL-R. VERSION 3, through the connector with rectifier bridge, can be used for AC applications. (see the connectors at the end of the section). Certifications |
Download
Certifications
