Take-off blocks Series MX
MX2 port: G1/2 – MX3 port: G1
Modular
Modular
The Take-off blocks, when equipped with a no return valve, can be used to bleed non lubricated air.
The Series MX has been realized to offer a multi-sector solution that guarantees saving in terms of installation time, space and costs.
A special configurator, available on Camozzi website at http://shop.camozzi.com (sec. Configurators), allows the customer to choose the most suitable solution for his application, selecting single components or by configuring assembled FRLs.
General Data
| Construction | Modular, compact, diaphragm-type |
| Ports | MX2: G1/2 MX3: G1 |
| Take-off ports | MX2: G1/2 MX3: G1 |
| Mounting | In-line Wall-mounting (by means of clamps) |
| Working temperature | -5°C ÷ 50°C up to 16 bar (with the dew point of the fluid lower than 2°C at the min. working temperature) -5°C ÷ 60°C up to 10 bar (with the dew point of the fluid lower than 2°C at the min. working temperature) |
| Nominal flow at 6 bar with ∆p = 1 bar | MX2-1/2-B00 = 6800 Nl/min MX2-1/2-B01 = 5700 Nl/min MX3-1-B00 = 14500 Nl/min MX3-1-B01 = 10500 Nl/min |
| Fluid | Compressed air |
Coding Example
| MX | 2 | – | 1/2 | – | B | 00 | – | LH |
| MX | SERIES |
| 2 | SIZE 2 = G1/2 3 = G1 |
| 1/2 | PORT 2 = G1/2 1 = G1 |
| B | TAKE-OFF BLOCK |
| 00 | DESIGN TYPE 00 = Without no return valve (standard) 01 = With no return valve 02 = Without no return valve, with double O-ring seat |
| LH | FLOW DIRECTION = From left to right (standard) LH = From right to left |
For the assembly of a single component with fixing flanges or wall-mounting, see the section “FRL Series MX Assembled”.
