Take-off blocks Series MD
Module with interchangeable cartridges: threaded (1/8, 1/4, 3/8) or integrated with super-rapid fitting for tube with Ø 6, 8 and 10 mm (5 outlets)
Intermediate junction cartridge (3 outlets)
Intermediate junction cartridge with non-return valve
Intermediate junction cartridge (3 outlets)
Intermediate junction cartridge with non-return valve
The take-off block can be positioned as desired among the other blocks of the air treatment unit and allows to draw in air from different sides.
The intermediate cartridge, that can also be supplied with a non-return valve, enables to draw in a reduced quantity of air. The take-off block enables to connect two air treatment units that can be mounted on both sides of the block.
The intermediate cartridge, that can also be supplied with a non-return valve, enables to draw in a reduced quantity of air. The take-off block enables to connect two air treatment units that can be mounted on both sides of the block.
General Data
| Construction | Modular, compact |
| Ports – Take-off block | With interchangeable cartridges: 1/8, 1/4 and 3/8 threaded or integrated with super-rapid fitting for tube with Ø 6, 8 and 10 mm |
| Ports – Joining cartridge with derivation | 3/8 |
| Ports – Joining cartridge with VNR | 3/8 |
| Derivations – Joining cartridge | 2×1/8 + 1×3/8 |
| Fixing – Take-off block | In-line Wall-mounting by means of through holes in the body or with a support bracket |
| Working temperature | -5°C ÷ 50°C |
| Working pressure | 0 ÷ 16 bar |
| Nominal flow at 6 bar with ∆p = 1 bar | MD1-B00-1/8 = 1300 Nl/min MD1-B00-1/4 = 2300 Nl/min MD1-B00-3/8 = 3400 Nl/min |
| Fluid | Compressed air |
Coding Example
| MD | 1 | – | B | 00 | – | 1/8 |
| MD | SERIES |
| 1 | DIMENSION 1 = 42 mm |
| B | TAKE-OFF BLOCK |
| 00 | DESIGN TYPE 00 = 5 outlets 01 = 3 outlets (only without cartridges) 02 = Increased inlet |
| 1/8 | PORTS (IN – OUT) * = Without cartridges 1/8 = G1/8 1/4 = G1/4 3/8 = G3/8 6 = Tube Ø6 8 = Tube Ø8 10 = Tube Ø10 |
* If the inlet (IN) cartridge is different from the outlet (OUT) cartridge, both dimensions shall be indicated.
Example: MD1-B00-3/8-10.
Example: MD1-B00-3/8-10.
