Stainless steel cylinders Series 90
Single- and double-acting, cushioned, magnetic
ø 32, 40, 50, 63, 80, 100 and 125 mm
ø 32, 40, 50, 63, 80, 100 and 125 mm
The Series 90 cylinders can be used in critical applications in which a high corrosion resistance is required (for example off-shore, marine, food).
This series of cylinders is normally equipped with end of stroke buffers with adjustable pneumatic cushioning.
Moreover, they are equipped with a mechanical cushioning that makes the impact of the piston less noisy as it reaches the end of the stroke.
General Data
| Construction | with tie-rods |
| Operation | single-acting or double-acting |
| Design | ISO 15552 |
| Materials | – end blocks, barrel and rod in stainless steel AISI 316 – seals in NBR – plastic guiding element, NSF H1-certified lubricant |
| Mountings | several types of cylinders mounting brackets available |
| Strokes min. max | |
| Operating temperature | 0°C ÷ 80°C (with dry air – 20°C) |
| Operating pressure | 1 ÷ 10 bar |
| Speed | 10 ÷ 1000 mm/sec (no load) |
| Fluid | Filtered air, without lubrication. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted. |
Coding Example
| 90 | M | 2 | A | 050 | A | 0200 |
| 90 | SERIES | |
| M | VERSION M = standard, magnetic | |
| 2 | OPERATION 1 = single-acting, front spring 2 = double-acting, front and rear cushions 6 = double-acting, through-rod, front and rear cushions | PNEUMATIC SYMBOLS CS06 CD09 CD13 |
| A | MATERIALS A = stainless steel AISI 316, seals in NBR V = stainless steel AISI 316, all seals in FKM (150°C) | |
| 050 | BORE 032 = 32 mm 040 = 40 mm 050 = 50 mm 063 = 63 mm 080 = 80 mm 100 = 100 mm 125 = 125 mm | |
| A | TYPE OF DESIGN A = standard with piston rod lock nut Mod. U | |
| 0200 | STROKE (see the table) | |
| = standard V = rod seal in FKM |
