Silencers Series 29
Series: 2901 – 2903 – 2921 – 2931 – 2928 – 2929 – 2905
Ports: M5, G1/8, G1/4, G3/8, G1/2, G3/4, G1
Ø 4, 6, 8, 10, 12 mm
Ports: M5, G1/8, G1/4, G3/8, G1/2, G3/4, G1
Ø 4, 6, 8, 10, 12 mm
The silencers are indispensable elements for eliminating or reducing the characteristic noise of compressed air during discharge operations.
They should always be placed on the outlets of 3/2, 5/2 or 5/3-way valves.
When carrying out maintenance, the silencers should be degreased using white spirit or paraffin and compressed air blown through them in the opposite direction to operation.Flow rate: determined with inlet supply 6 bar and output in atmosphere.
They should always be placed on the outlets of 3/2, 5/2 or 5/3-way valves.
When carrying out maintenance, the silencers should be degreased using white spirit or paraffin and compressed air blown through them in the opposite direction to operation.Flow rate: determined with inlet supply 6 bar and output in atmosphere.
Noise level: determined through a test which is carried out using a phonometer.
Placing the phonometer one meter away from the application at the same height for a period of ten seconds gives an average reading of the noise generated.
General Data
| Construction | Body with male and female thread |
| Materials used for body | 2901 – 2903: Brass 2921 – 2931: Coppering steel 2928 – 2929: Polyethylene |
| Materials used for silencing | 2901 – 2903: Stainless steel 2921 – 2931: Bronze (sintered) 2928 – 2929: Polyethylene (sintered) |
| Ports | M5 – G1/8 – G1/4 – G3/8 – G1/2 – G3/4 – G1 Ø 4, 6, 8, 10, 12 mm |
