JUMO MAERA S26

The level probe measures the level of liquids continuously and hydrostatically. It can be used in ventilated tanks at filling heights from 2.50 to 25 mH2O. The level probe is used, among other places, in pumping stations or storage tanks.

Categories: Level, Level probes

Technical data
Downloads

Technical data

General technical data
Measuring range	250 mbar to 2.5 bar (2.50 to 25 mH2O)
Medium temperature	0 to 50 °C
Accuracy (linearity)	±0.3 % (optional ±0.2 %)
Output signal	0 to 20 mA, three-wire; 4 to 20 mA, two-wire or three-wire; 0.5 to 4.5 V, three-wire; 0 to 10 V, three-wire 1 to 5 (6) V, three-wire
Housing material	Stainless steel
Cable material	PE, FEP, PUR, EPR
Additional equipment	Reverse-polarity protection
Protection type	IP68
Approval	Drinking water approval (ACS, PZH); CSA; metrological certificate; EAC
Declaration of manufacturer	CE
Application areas	Indoor installation, well water (without salt content), rainwater, drinking water, caustic soda (20 %, 20 °C), diesel, heating oil, car washes, wastewater

General technical data

Measuring range

250 mbar to 2.5 bar (2.50 to 25 mH2O)

Medium temperature

0 to 50 °C

Accuracy (linearity)

±0.3 % (optional ±0.2 %)

Output signal

0 to 20 mA, three-wire; 4 to 20 mA, two-wire or three-wire; 0.5 to 4.5 V, three-wire; 0 to 10 V, three-wire 1 to 5 (6) V, three-wire

Housing material

Stainless steel

Cable material

PE, FEP, PUR, EPR

Additional equipment

Reverse-polarity protection

Protection type

IP68

Approval

Drinking water approval (ACS, PZH); CSA; metrological certificate; EAC

Declaration of manufacturer

CE

Application areas

Indoor installation, well water (without salt content), rainwater, drinking water, caustic soda (20 %, 20 °C), diesel, heating oil, car washes, wastewater