Brass rapid push-on fittings for plastic tubes Series 1000
Tube external diameters: 5/3, 6/4, 8/6, 10/8, 12/10, 15/12,5 mm
Fittings threads: metric (M5, M6, M12x1, M12x1,25),
BSP (G1/8, G1/4, G3/8, G1/2), BSPT (R1/8, R1/4, R3/8, R1/2)
Fittings threads: metric (M5, M6, M12x1, M12x1,25),
BSP (G1/8, G1/4, G3/8, G1/2), BSPT (R1/8, R1/4, R3/8, R1/2)
Series 1000 rapid push-on fittings can be easily installed.
The push-in locking nuts can be tightened both manually and with a spanner even in case of stiff tubes like the PA or the Hytrel Polyester.
The special shape of the guiding cone ensures that the tube cannot be accidentally cut.
The push-in locking nuts can be tightened both manually and with a spanner even in case of stiff tubes like the PA or the Hytrel Polyester.
The special shape of the guiding cone ensures that the tube cannot be accidentally cut.
General Data
| Diameter | 5/3 – 6/4 – 8/6 – 10/8 – 12/10 – 15/12,5 mm |
| Threads | GAS conical ISO 7 (BSPT) GAS cylindrical ISO 228 (BSP) M5 – M6 NPT and metric (available on request) |
| Temperature [°C] | -20°C ÷ 80°C NOTE: for a better use of the fitting we recommend to check the tubing specifications. |
| Tube to connect | PA polyethylene braided PVC rilsan PU, Hytrel Polyester |
| Medium | compressed air low pressure fluids |
| Materials | body and nut: nickel-plated brass O-ring: NBR thread seals: PTFE, PA, AL |
| Working pressure | the nominal pressure of the fittings is always higher than the pressure of the tube |
