Pressure microregulators Series M
Ports G1/8, G1/4
Series M pressure regulator is available with G1/8 and G1/4 ports.
Its design incorporates a diaphragm and relieving so as to allow decremental adjustments as well.
Microregulators are available with different regulation types: non-relieving, very sensitive self-relieving (through a light air leak) and VS (valve with fast draining).
Its design incorporates a diaphragm and relieving so as to allow decremental adjustments as well.
Microregulators are available with different regulation types: non-relieving, very sensitive self-relieving (through a light air leak) and VS (valve with fast draining).
The VS version is used when a regulator should be inserted between the valve and cylinder, or capacity, without any negative influence on the exhaust.
General Data
| Construction | Diaphragm type |
| Materials | Brass body, stainless steel spring, NBR O-ring |
| Ports | G1/8 – G1/4 |
| Weight | 0,235 Kg |
| Pressure gauge ports | G1/8 |
| Mounting | In-line or panel mounting (in any position) |
| Working temperature | -5°C ÷ 50°C (with the dew point of the fluid lower than 2°C at the min. working temperature) |
| Inlet pressure | 0 ÷ 16 bar |
| Outlet pressure | 0,5 ÷ 10 bar (standard) 0,5 ÷ 2 bar 0,5 ÷ 4 bar 0,5 ÷ 7 bar |
| Secondary pressure (relieving) | With relieving (standard) Without relieving |
| Fluid | Compressed air |
Coding Example
Coding Example
| M | 0 | 04 | – | R | T | 0 | 2 | – | VS |
| M | SERIES |
| 0 | SIZE |
| 04 | PORTS 08 = G1/8 04 = G1/4 |
| R | REGULATOR |
| T | OPERATING PRESSURE 0 = 0,5 ÷ 10 bar (standard) 1 = 0,5 ÷ 4 bar 2 = 0,5 ÷ 2 bar 7 = 0,5 ÷ 7 bar T = Calibrated * B = Locked * |
| 0 | DESIGN TYPE 0 = Self relieving 1 = Non relieving 5 = Relieving with precise setting |
| 2 | PRESSURE GAUGE ** = Without pressure gauge (standard) 1 = With pressure gauge 0-2,5 with working pressure 0,5 ÷ 2 bar 2 = With pressure gauge 0-6 with working pressure 0,5 ÷ 4 bar 3 = With pressure gauge 0-10 with working pressure 0,5 ÷ 7 bar 4 = With pressure gauge 0-12 with working pressure 0,5 ÷ 10 bar |
| VS | REGULATION TYPE = Without high relief flow (standard) VS = High relief flow |
* If the regulator is calibrated or locked, after the regulation type add the inlet pressure “■” and the outlet pressure “●”
INLET PRESSURE: ■ = Enter the SUPPLY pressure value
OUTLET PRESSURE: ● = Enter the OUTLET pressure value for the LOCKED regulator or the maximum value of the ADJUSTABLE pressure for the CALIBRATED regulator
Example of a calibrated regulator with Inlet Pressure = 6,3 bar and Outlet Pressure = 4,5 bar
Complete part number: M04-RT0-6,3-4,5.
** The pressure gauges are supplied disassembly mod. M043-P..
