Micro regulator electronic proportional Series K8P

Proportional regulator for the pressure control
Series K8P electronic proportional micro regulators have evolved from our Series K8 mini-solenoid valves. Series K8P regulators guarantee excellent pressure regulation, fast response times, self-regulation and low energy consumption.
Series K8P is a high performance proportional pressure regulator which is suitable for use in all applications where high precision, quick response times and low consumption are required.The K8P regulator adjusts the outlet pressure through the operation of two K8 monostable valves according to the inlet signal and to the retroactivity of the internal pressure sensor.
A self-adjusting function has been integrated into the regulator control algorithm to guarantee the highest levels of performance apart from the volume connected.

General Data

Fluidsfiltered compressed air, unlubricated, according to ISO 8573-1 class 7.4.4,
oxygen, inert gases (argon, molecular nitrogen)
PressuresRegulated pressure
0,5 ÷ 10 bar
0,15 ÷ 3 bar
0,35 ÷ 7 bar
0,05 ÷ 1 barMax inlet pressure
11 bar
4 bar
8 bar
1,5 bar
Working temperature0 ÷ 50°C
Analogical input0-10 V DC 4-20 mA Ripple ≤ 0,2%
Analogical output0,5 – 9,5 V [ Feedback ]
Analog input impedance20.000 Ω for versions 0-10 V
250 Ω for versions 4-20 mA
Maximum flow12 l/min with regulated pressure = 6 bar (IN Pres. 10 bar)
6 l/min with regulated pressure = 3 bar (IN Pres. 4 bar)
8 l/min with regulated pressure = 7 bar (IN Pres. 8 bar)
2 l/min with regulated pressure = 1 bar (IN Pres. 1,5 bar)
Supply / Use24 V – ~ 1 W
Function3/2 NC
Linearity≤ ±1% FS
Hysteresis±0,5% FS
Resolution±0,5% FS (referred to the command signal)
Repeatability [% FS]±0,5% FS
Minimal set point change50 mV => 50 mB (10 bar)
100 mV => 30 mB (3 bar)
Electrical connectionM8 4 Pin (Male)
Protection classIP65 (with standard sub-base or with single use)
IP51 (with Light sub-base and Light Sub-base for the pressure remote reading)
In compliance with the European Directive 2004/108/EC

Coding Example

K8P0D5220OX1
K8PSERIES
0BODY DESIGN:
0 = Stand alone
S = Standard Sub-base
L = Light Sub-base
T = Light Sub-base for the pressure remote reading
DWORKING PRESSURE:
D = 0 – 10 bar
E = 0 – 3 bar
F = 0 – 7 bar
B = 0 – 1 bar
5VALVE FUNCTIONS:
5 = 3/2-way NC
2COMMAND:
2 = 0-10 V DC
3 = 4-20 mA
2OUTPUT SIGNAL:
2 = 0-10 V
0CABLE LENGTH:
0 = without cable
2F = straight cable, 2 m
2R = right angle cable (90 degrees), 2 m
5F = straight cable, 5 m
5R = right angle cable (90 degrees), 5 m
OX1USE WITH OXYGEN:
= Not suitable for use with oxygen
OX1 = for use with oxygen – cleanliness level according to ASTM G93-03 Standard Level E
APPLICATIONSThe K8P proportional regulator can be used as a pilot valve to control the opening of high flow valves or to check the high flow pressure regulators proportionally (version with sub-base for the pressure remote reading).
It enables proportional control of power in lifting systems and can be used with inert gas to maintain a constant pressure in pneumatic cylinders or expansion valve chambers.
It has also been designed to maintain a constant pressure during the pulling power applied to the wires in winding machines, to modulate pressure during the smoothing process in woodworking machines or to adjust the opening of diaphragm valves.

Download