Lubricators Series MX
MX2 ports: G3/8, G1/2, G3/4 – MX3 ports: G3/4, G1
Modular
Bowl with technopolymer cover and bayonet-type mounting
Modular
Bowl with technopolymer cover and bayonet-type mounting
MX is the new series of air treatment components realized by Camozzi, characterized by a modern, linear and compact design, offering high performances.
The perfect integration between metal alloys and technopolymers has allowed the realization of a reliable product, light and strong at the same time.
Thanks to a new concept of modularity, moreover, the mounting of components has become easier.
These proportional lubricators enable a precision metering.The Series MX has been realized to offer a multi-sector solution that guarantees saving in terms of installation time, space and costs.
The perfect integration between metal alloys and technopolymers has allowed the realization of a reliable product, light and strong at the same time.
Thanks to a new concept of modularity, moreover, the mounting of components has become easier.
These proportional lubricators enable a precision metering.The Series MX has been realized to offer a multi-sector solution that guarantees saving in terms of installation time, space and costs.
General Data
| Construction | Modular, compact |
| Materials | See TABLE OF MATERIALS on the following page |
| Ports | MX2: G3/8 – G1/2 – G3/4 MX3: G3/4 – G1 |
| Oil capacity | MX2: 170 cm³ MX3: 230 cm³ |
| Oil refilling | Even during use |
| Mounting | Vertical in-line Wall-mounting (by means of clamps) |
| Working temperature | -5°C ÷ 50°C up to 16 bar (with the dew point of the fluid lower than 2°C at the min. working temperature) -5°C ÷ 60°C up to 10 bar (with the dew point of the fluid lower than 2°C at the min. working temperature) |
| Oil for lubrication | Use ISO VG32 oils. Once applied, the lubrication should never be interrupted |
| Min. air consumption for lubrication at 1 bar | MX2: 17 l/min MX3: 50 l/min |
| Min. air consumption for lubrication at 6 bar | MX2: 38 l/min MX3: 90 l/min |
| Nominal flow | See FLOW DIAGRAMS on the following pages |
Coding Example
| MX | 2 | – | 1/2 | – | L | 00 | – | LH |
| MX | SERIES |
| 2 | SIZE 2 = G3/8 – G1/2 – G3/4 3 = G3/4 – G1 |
| 1/2 | PORT 3/8 = G3/8 1/2 = G1/2 3/4 = G3/4 1 = G1 |
| L | LUBRICATOR |
| 00 | DESIGN TYPE 00 = Atomized oil |
| LH | FLOW DIRECTION = From left to right (standard) LH = From right to left |
For the assembly of a single component with fixing flanges or wall-mounting, see the section “FRL Series MX Assembled”.
