JUMO mTRON T

The relay module provides 4 relay outputs, which are controlled via the system bus by digital signals (assignment in the connection list or directly by the PLC). Each relay output is equipped with a changeover contact AC 230 V/3 A.

Categories: Automatisierung, I/O modules

Technical data
Downloads

Technical data

General technical data
Outputs	4 relay outputs (each with changeover contact 230 V/3 A) controlled via the system bus by digital signals
Connections	Removable terminal strips with PUSH IN technology
Special features	Switching statuses are visualized with LEDs, automatic configuration after replacement of the module insert (Plug and Play), connection of outputs on the front, fast wiring of operating voltage and system bus provided by simple module connection principle
Approvals	UL, metrological certificate, DNV GL
Housing	Plastic housing for DIN-rail mounting in the control cabinet
Protection type	IP20
Ambient temperature	-20 to +55 °C
Voltage supply	DC 24 V +25/-20 %
Dimensions (W × H × D)	22.5 mm × 103.6 mm × 101.5 mm (without connection elements)

General technical data

Outputs

4 relay outputs (each with changeover contact 230 V/3 A) controlled via the system bus by digital signals

Connections

Removable terminal strips with PUSH IN technology

Special features

Switching statuses are visualized with LEDs, automatic configuration after replacement of the module insert (Plug and Play), connection of outputs on the front, fast wiring of operating voltage and system bus provided by simple module connection principle

Approvals

UL, metrological certificate, DNV GL

Housing

Plastic housing for DIN-rail mounting in the control cabinet

Protection type

IP20

Ambient temperature

-20 to +55 °C

Voltage supply

DC 24 V +25/-20 %

Dimensions (W × H × D)

22.5 mm × 103.6 mm × 101.5 mm (without connection elements)