JUMO TYA 432

Thyristor power switches are required for contactless switching of the alternating current loads. A typical application is the switching of resistive inductive loads at a high switching frequency, particularly in the industrial sector.

Categories: Actuator, Semiconductor relay

Technical data
Downloads

Technical data

General technical data
Peak blocking voltage	1600 Vs; 1200 Vs
Ambient temperature	-40 to +70 °C
Galvanic isolation	Between the control and power section through optocouplers; insulation voltage 4 kV
Load current (max.)	60 A (at 40 °C)
Operating mode	Zero point control
Load voltage	24 to 265 V AC; 42 to 660 V AC
Approval	cULus/CSA
Protection type	IP20
Control voltage	4 to 32 V DC; 5 to 32 V DC

General technical data

Peak blocking voltage

1600 Vs; 1200 Vs

Ambient temperature

-40 to +70 °C

Galvanic isolation

Between the control and power section through optocouplers; insulation voltage 4 kV

Load current (max.)

60 A (at 40 °C)

Operating mode

Zero point control

Load voltage