Lubricators Series MD
Ports with interchangeable cartridges: threaded (1/8, 1/4, 3/8) or integrated with super-rapid fitting for tube with Ø 6, 8 and 10 mm
Modular assembly
Bowl with technopolymer cover and bayonet-type mounting
Modular assembly
Bowl with technopolymer cover and bayonet-type mounting
The lubricator allows the nebulization of lubricating oil which is necessary to the functioning of components in specific conditions of use.
By means of a regulation screw the amount of oil can be properly adjusted in order to avoid unnecessary overdoses.
General Data
| Construction | Modular, compact |
| Materials | See TABLE OF MATERIALS on the following page |
| Ports | With interchangeable cartridges: 1/8, 1/4 and 3/8 threaded or integrated with super-rapid fitting for tube with Ø 6, 8 and 10 mm |
| Oil capacity | 40 cm³ |
| Oil refilling | Even during use |
| Mounting | In vertical position by means of through holes in the body |
| Working temperature | -5°C ÷ 50°C up to 16 bar |
| Oil for lubrication | Use ISO VG32 oils. Once applied, the lubrication should never be interrupted |
| Working pressure | 0 ÷ 16 bar |
| Min. air consumption for lubrication at 1 bar | 15 Nl/min |
| Min. air consumption for lubrication at 6 bar | 25 Nl/min |
| Nominal flow | See FLOW DIAGRAMS on the following pages |
| Fluid | Compressed air |
Coding Example
| MD | 1 | – | L | 00 | 1/8 | – |
| MD | SERIES |
| 1 | DIMENSION 1 = 42 mm |
| L | LUBRICATOR |
| 00 | DESIGN TYPE 00 = Oil mist with refill valve 10 = Oil mist without refill valve |
| 1/8 | PORTS (IN – OUT) * = Without ports 1/8 = G1/8 1/4 = G1/4 3/8 = G3/8 6 = Tube Ø6 8 = Tube Ø8 10 = Tube Ø10 * If the inlet (IN) cartridge is different from the outlet (OUT) cartridge, both dimensions shall be indicated. |
