Rotary cylinders Series 69
Magnetic, cushioned
Ø 32, 40, 50, 63, 80, 100, 125 mm
Rotational angles: 90°, 180°, 270° and 360°
Ø 32, 40, 50, 63, 80, 100, 125 mm
Rotational angles: 90°, 180°, 270° and 360°
Series 69 rotary cylinders are available in 7 different bores and can satisfy a large range of operational requirements.
Through an adjustment screw it is possible to recover part of the play between pinion and rack.
On the heads there is a screw which allows rotation to be adjusted by ± 5°.
General Data
| Type of construction | With internal tie-rods |
| Operation | Double-acting |
| Materials | End blocks / tube / body = AL rack = steel rack guide shoe = acetal resin pinion = hardened steel seals = NBR |
| Type of mounting | Threaded holes in the central body by means of brackets for ISO 15552 cylinders |
| Bore | Ø 32, 40, 50, 63, 80, 100, 125 mm |
| Operating temperature | 0°C ÷ 80°C (with dry air – 20°C) |
| Standard rotation angles | 90°, 180°, 270°, 360° (others on request) |
| Bearings | Ball bearings (Ø32 mm teflon bronze guide) |
| Operating pressure | 1 ÷ 10 bar |
| Fluid | Filtered air class 7.8.4 according to ISO 8573-1. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted |
Coding Example
| 69 | – | 050 | / | 090 | – | F |
| 69 | SERIES | PNEUMATIC SYMBOL CD18 |
| 050 | BORE 032 = 32 mm 040 = 40 mm 050 = 50 mm 063 = 63 mm 080 = 80 mm 100 = 100 mm 125 = 125 mm | |
| 090 | ROTATIONAL ANGLES 090 = 90° 180 = 180° 270 = 270° 360 = 360° | |
| F | PINION F = Female M = Male | |
| SEALS MATERIAL = NBR W = FKM + 130°C |
