Coalescing filters Series MX
MX2 ports: G3/8, G1/2, G3/4 – MX3 ports: G3/4, G1
Modular
Bowl with technopolymer cover and bayonet-type mounting
Modular
Bowl with technopolymer cover and bayonet-type mounting
The Series MX air treatment components are characterized by a modern, linear and compact design, offering high performances.
The perfect integration between metal alloys and technopolymers has allowed the realization of a reliable product, light and strong at the same time.
Thanks to a new concept of modularity, moreover, the mounting of components has become easier.The Series MX has been realized to offer a multi-sector solution that guarantees saving in terms of installation time, space and costs.
The perfect integration between metal alloys and technopolymers has allowed the realization of a reliable product, light and strong at the same time.
Thanks to a new concept of modularity, moreover, the mounting of components has become easier.The Series MX has been realized to offer a multi-sector solution that guarantees saving in terms of installation time, space and costs.
General Data
| Construction | Modular, compact |
| Materials | See TABLE OF MATERIALS on the following page |
| Ports | MX2: G3/8, G1/2, G3/4 – MX3: G3/4, G1 |
| Condensate capacity | MX2: 55 cm³ – MX3: 85 cm³ |
| Mounting | Vertical in-line or wall-mounting (by means of clamps) |
| Working temperature | -5°C ÷ 50°C up to 16 bar (with the dew point of the fluid lower than 2°C at the min. working temp.) -5°C ÷ 60°C up to 10 bar (with the dew point of the fluid lower than 2°C at the min. working temp.) |
| Draining of condensate | Manual-semi automatic (standard), automatic, depressurization protected, direct G1/8 exhaust |
| Nominal flow | See FLOW DIAGRAMS on the following pages |
| Quality of delivered air according to ISO 8573-1:2010 | Class [2:8:2] with 1 μm filtering element Class [1:8:1] with 0,01 μm filtering element |
| Residual oil content with inlet at 3 mg/m³ | < 0,01 mg/m³ < 0,1 mg/m³ |
| Oil retain efficiency | 99,80% 97% |
| Particles retain efficiency | 99,99999% 99,999% |
| Fluid | Compressed air |
| Pre-filtering with filtering element of 1µm Pre-filtering with filtering element of 0,01 µm |
It is recommended to use a filter of 5µm It is recommended to use a filter of 1µm |
Coding Example
| MX | 2 | – | 1/2 | – | FC | 0 | 0 | 1 | – | LH |
| MX | SERIES |
| 2 | SIZE 2 = G3/8 – G1/2 – G3/4 3 = G3/4 – G1 |
| 1/2 | PORTS 3/8 = G3/8 1/2 = G1/2 3/4 = G3/4 1 = G1 |
| FC | COALESCING FILTER |
| 0 | FILTERING ELEMENT 0 = 0,01 µm (standard) 1 = 1 µm |
| 0 | DRAINING OF CONDENSATE 0 = Semiautomatic-manual drain (standard – only for polymer bowl) 3 = Automatic drain 5 = Depressuring drain, protected (only for polymer bowl) 8 = Without drain, with port G1/8 |
| 1 | VISUAL BLOCKAGE INDICATOR = Not present 1 = Present |
| LH | FLOW DIRECTION = From left to right (standard) LH = From right to left |
For the assembly of a single component with fixing flanges or wall-mounting, see the section “FRL Series MX Assembled”.
