Coalescing filters Series MD
Ports with interchangeable cartridges: threaded (1/8, 1/4, 3/8) or integrated with super-rapid fitting for tube with Ø 6, 8 and 10 mm
Modular assembly
Bowl with technopolymer cover and bayonet-type mounting
Modular assembly
Bowl with technopolymer cover and bayonet-type mounting
The coalescing filter is a fine oil separator filter that removes the solids with dimensions from 0,1 to 5 µm and oil vapours with a concentration from 0,01 to 0,1 mg/m³.
For a correct fucntioning they require a pre-filtering.
Given the characteristic of this filter, it is recommended to replace the filter element at least every 12 months or 8000 working hours.Thanks to the solution adopted for the pneumatic connection, it is possible to equip the same element with interchangeable cartridges that can either be threaded, or with an integrated super-rapid fitting, both types available in different sizes.
Intermediate cartridges can be also integrated to join multiple functions or with derivation to draw air.
An additional air intake, with the same characteristic of the outlet air, is available on the front side and on the rear one.
This intake can be used by utilities with limited consumption.
For a correct fucntioning they require a pre-filtering.
Given the characteristic of this filter, it is recommended to replace the filter element at least every 12 months or 8000 working hours.Thanks to the solution adopted for the pneumatic connection, it is possible to equip the same element with interchangeable cartridges that can either be threaded, or with an integrated super-rapid fitting, both types available in different sizes.
Intermediate cartridges can be also integrated to join multiple functions or with derivation to draw air.
An additional air intake, with the same characteristic of the outlet air, is available on the front side and on the rear one.
This intake can be used by utilities with limited consumption.
General Data
| Construction | Modular, compact with filtering element in BOROSILICATE |
| Materials | See TABLE OF MATERIALS on the following page |
| Ports | With interchangeable cartridges: 1/8, 1/4 and 3/8 threaded or integrated with super-rapid fitting for tube with Ø 6, 8 and 10 mm |
| Condensate capacity | 24 cm³ |
| Fixing | Vertical in-line Wall-mounting by means of through holes in the body or with a support bracket |
| Working temperature | -5°C ÷ 50°C up to 16 bar |
| Condensate drain | Semi-automatic manual, automatic protected depressurisation, direct G1/8 exhaust |
| Quality of delivered air according to ISO 8573-1:2010 | Class [2:8:2] with 1 µm filtering element (pre-filtering with Class [6:8:4] is recommended) Classe [1:8:1] with 0,01 µm filtering element (pre-filtering with Classe [2:8:2] is recommended) |
| Working pressure | 0,3 ÷ 16 bar |
| Nominal flow | See FLOW DIAGRAMS on the following pages |
| Oil retain efficiency | 99,80% (0,01µm) 97% (1µm) |
| Particles retain efficiency | 99,99999% (0,01µm) 99,999% (1µm) |
| Fluid | Compressed air |
Coding Example
| MD | 1 | – | FC | 0 | 0 | 0 | – | 1/8 |
| MD | SERIES |
| 1 | DIMENSION 1 = 42 mm |
| FC | COALESCING FILTER |
| 0 | FILTERING ELEMENT 0 = 0,01 µm 1 = 1 µm |
| 0 | DRAINING OF CONDENSATE 0 = Semiautomatic-manual drain 5 = Automatic drain, protected depressurisation 8 = Direct G1/8 exhaust |
| 0 | VISUAL BLOCKAGE INDICATOR 0 = Not present 1 = Present |
| 1/8 | PORTS (IN – OUT) * = Without cartridges 1/8 = G1/8 1/4 = G1/4 3/8 = G3/8 6 = Tube Ø6 8 = Tube Ø8 10 = Tube Ø10* If the inlet (IN) cartridge is different from the outlet (OUT) cartridge, both dimensions shall be indicated. Example: MD1-FC000-1/4-10 |
