Pressure regulators Series MX
Manifold ports: G1/2 (MX2 only)
Modular – Available with built-in pressure gauges or ports for gauges
The availability of constant values of the secondary pressure ensures performance optimization and energy saving. The tamper-proof system allows to adjust pressure safely with primary pressure compensation. All reducers are equipped with an integrated locking system and built-in pressure gauges for a more compact product. The regulators Series MX are suitalbe also for panel mountings.
The Series MX has been realized to offer a multi-sector solution that guarantees saving in terms of installation time, space and costs.
A special configurator, available on Camozzi website at http://shop.camozzi.com (sec. Configurators), allows the customer to choose the most suitable solution for his
application, selecting single components or by configuring assembled FRLs.
General Data
| Construction | Modular, compact, diaphragm type |
| Materials | See TABLE OF MATERIALS on the following page |
| Ports | MX2: G3/8 – G1/2 – G3/4 – MX3: G3/4 – G1 Manifold regulator: G1/2 (MX2 only) |
| Mounting | Vertical in-line, wall-mounting (by means of clamps), panel mounting |
| Operating temperature | -5°C ÷ 50°C up to 16 bar (with the dew point of the fluid lower than 2°C at the min. working temperature) -5°C ÷ 60°C up to 10 bar (with the dew point of the fluid lower than 2°C at the min. working temperature) |
| Inlet pressure | 0 ÷ 16 bar |
| Outlet pressure | 0,5 ÷ 10 bar (standard) 0,5 ÷ 4 bar 0,5 ÷ 7 bar (MX2 only) |
| Overpressure exhaust | With relieving (standard) or without relieving |
| Nominal flow | See FLOW DIAGRAMS on the following pages |
| Fluid | Compressed air |
| Pressure gauge | Built-in pressure gauge (standard) with G1/4 port (MX3 only) or G1/8 port (MX2 only) |
Coding Example
| MX | 2 | 3/8 | R | 0 | 0 | 4 | LH |
| MX | SERIES |
| 2 | SIZE 2 = G3/8 – G1/2 – G3/4 3 = G3/4 – G1 |
| 3/8 | PORTS 3/8 = G3/8 1/2 = G1/2 3/4 = G3/4 1 = G1 |
| R | TYPE OF REGULATOR R = Pressure regulator M = Manifold pressure regulator (MX2 – G1/2 only) |
| 0 | OPERATING PRESSURE (1 bar = 14,5 psi) 0 = 0,5 ÷ 10 bar (standard) 4 = 0,5 ÷ 4 bar 7 = 0,5 ÷ 7 bar (MX2 only) |
| 0 | DESIGN TYPE 0 = Relieving (standard) 1 = Without relieving 2 = Relieving, with by-pass valve (only regulator) 3 = Without relieving, with by-pass valve (only regulator) |
| 4 | PRESSURE GAUGE 0 = Without pressure gauge (with threaded port for gauges) 2 = With built-in pressure gauge 0-6 and working pressure 0,5 ÷ 4 bar 3 = With built-in pressure gauge 0-10 and working pressure 0,5 ÷ 7 bar (MX2 only) 4 = With built-in pressure gauge 0-12 and working pressure 0,5 ÷ 10 bar (standard) |
| LH | FLOW DIRECTION = From left to right (standard) LH = From right to left |
