Activated carbon filters Series MD
Ports with interchangeable cartridges: threaded (1/8, 1/4, 3/8) or integrated with super-rapid fitting for tube with Ø 6, 8 and 10 mm
Modular assembly
Bowl with technopolymer cover and bayonet-type mounting
Modular assembly
Bowl with technopolymer cover and bayonet-type mounting
Within a battery of filters the activated carbon version is placed at the end because it requires a pre-filtering like the coalescing filter.
Given the characteristic of this filter, it is recommended to replace the filter element at least every 6 months or 1000 working hours.The operating principle is based on the adsorption characteristic of the filtering element which is composed of extremely porous fibers placed on different layers.
These fibers create a cross-linked and are thus able to adsorb wet parts and contaminants remaining in the passing air, for example oil vapours/smokes, as well as odours generated from these contaminants.
Given the characteristic of this filter, it is recommended to replace the filter element at least every 6 months or 1000 working hours.The operating principle is based on the adsorption characteristic of the filtering element which is composed of extremely porous fibers placed on different layers.
These fibers create a cross-linked and are thus able to adsorb wet parts and contaminants remaining in the passing air, for example oil vapours/smokes, as well as odours generated from these contaminants.
General Data
| Construction | Modular, compact with activated carbon filtering element |
| Materials | See TABLE OF MATERIALS on the following page |
| Ports | With interchangeable cartridges: 1/8, 1/4 and 3/8 threaded or integrated with super-rapid fitting for tube with Ø 6, 8 and 10 mm |
| Mounting | Vertical in-line Wall-mounting by means of through holes in the body or with a support bracket |
| Working temperature | 10°C ÷ 40°C (t max = 60°C) |
| Condensate drain | Not present |
| Quality of delivered air according to ISO 8573-1:2010 | Class [1:7:1] (pre-filtering in Class [1:8:1] is recommended) |
| Working pressure | 0,3 ÷ 16 bar |
| Nominal flow | See FLOW DIAGRAMS on the following pages |
| Filtering element | Actived carbon |
| Residual oil content | < 0,003 mg/m³ |
| Fluid | Compressed air |
Coding Example
| MD | 1 | – | FCA | 0 | – | 1/8 |
| MD | SERIES |
| 1 | DIMENSION 1 = 42 mm |
| FCA | ACTIVATED CARBON FILTER |
| 0 | VISUAL BLOCKAGE INDICATOR 0 = Not present 1 = Present |
| 1/8 | PORTS (IN – OUT) * = Without cartridges 1/8 = G1/8 1/4 = G1/4 3/8 = G3/8 6 = Tube Ø6 8 = Tube Ø8 10 = Tube Ø10* If the inlet (IN) cartridge is different from the outlet (OUT) cartridge, both dimensions shall be indicated. Example: MD1-FCA1-1/4-10. |
