Sanitary pressure gauge – Male connection (3-A marking)

P753S series have diaphragm seal to be combined with a pressure gauge. These series are suitable to be used for the situation where corrosive, contaminated, hot, and viscous pressure mediums are present, and it could be used for a chemical, food, beverage, biochemical, and pharmaceutical industry.

Enquiry
Add to quote
Part Number: Categories: ,

Extra Information

Special features 3-A certificated
Suitable for SIP and CIP
All stainless steel and welded construction
Nominal diameter 63 and 100 mm
Accuracy ±1.6% of full scale
If scale range less than 100 psi : ±2.0% of full scale
Scale range 0 ~ 3.5 MPa, single
Working Pressure Steady pressure : 75% of full scale value
Fluctuating pressure : 67% of full scale value
Operating temperature Ambient : -20 ~ 65°C
Fluid : Max. 121°C
Temperature effect Accuracy at temperature above and below the reference temperature (20℃) will be effected by approximately ±0.5% per 10℃ of full scale

Standard Features

Process connection DIN Round thread 28-8
Case and cover Stainless steel (304SS)
Electropolished with pressure relief
Window Safety glass
Movement Stainless steel
Dial White aluminium, with pointer stop pin
With black/red lettering, dual pressure scale
Pointer Black painted aluminium alloy
Helium leak rate Tested to confirm leakage rates of less than
10-8 mbar •ℓ/sec
System filling Food grade oil (FDA certified)
O-ring Supplied by FDA approved Supplier (Viton)
Optional Material of wetted parts : Electropolished 316L SS

Other Model