P753S Series_Sanitary pressure gauge – Male connection (3-A marking)
Service intended
P753S series have diaphragm seal to be combined with a pressure gauge. These series are suitable to be used for the situation where corrosive, contaminated, hot, and viscous pressure mediums are present, and it could be used for a chemical, food, beverage, biochemical, and pharmaceutical industry.
| Special features | 3-A certificated Suitable for SIP and CIP All stainless steel and welded construction |
| Nominal diameter | 63 and 100 mm |
| Accuracy | ±1.6 % of full scale If scale range less than 100 psi : ±2.0% of full scale |
| Scale range | 0 ~ 3.5 MPa, single |
| Working pressure | Steady pressure : 75 % of full scale value Fluctuating pressure : 67 % of full scale value |
| Operating temperature | Ambient : -20 ~ 65 °C Fluid : Max. 121 °C |
| Temperature effect | Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately ±0.5 % per 10 ℃ of full scale |
Standard features
| Process connection | DIN Round thread 28-8 |
| Case and cover | Stainless steel (304SS) Electropolished with pressure relief |
| Window | Safety glass |
| Movement | Stainless steel |
| Dial | White aluminium, with pointer stop pin With black/red lettering, dual pressure scale |
| Pointer | Black painted aluminium alloy |
| Helium leak rate | Tested to confirm leakage rates of less than 10-8 mbar •ℓ/sec |
| System filling | Food grade oil (FDA certified) |
| O-ring | Supplied by FDA approved Supplier (Viton) |
| Option | Material of wetted parts : Electropolished 316L SS |
© WISE Control Inc. All rights reserved. ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Certificates
