Product Description
Omniview
The graphical user interface is shown off on a 6,5” transreflective display screen with icons and symbols to guide you, in other words no text is involved.
The adaptive user interface will guide you throughout the measurement and alignment process.
We have fitted the Fixturlaser NXA Pro with gyros and can therefore adapt the screen view from the same side that the user is positioned – our OmniView function, i.e. the system knows where it is in relation to the machine.
vertizontal moves
The adaptive user interface will guide you throughout the measurement and alignment process. We are especially proud of the function – VertiZontal Moves – where you only have to measure once before making the required vertical and horizontal adjustments. Quite a time conserver in a time strained maintenance world!
power management system
The Fixturlaser NXA Pro has a power management system which will make your life so much easier! The display unit has a 10 hour continuous battery operating time, and should the need arise during an alignment job; the display unit can be express charged to an 80% capacity in one hour. The sensor units will last for 24 hours minimum thanks to the long-life batteries.
time saving technology
The Fixturlaser NXA Pro’s sensor units have graduated to the 2nd generation sensor. This sensor version improves the tolerance for detrimental external factors, such as vibrations and ambient light, and delivers the most accurate and precise measurement values compared to any other system. Measurement values are automatically registered throughout the entire measurement process. We have integrated line laser with the sensor and this combination virtually eliminates rough alignment, a huge time saver.
Very compact, only 33,5 mm in width, the sensor units will fit in the tightest spots. The sensor units contain long-life batteries, Bluetooth communication and gyroscopes. The gyroscopes make it possible to measure according to the Tripoint Method in the vertical shaft alignment application, something that no other shaft alignment instrument is capable of!
Technical Data
Technical Specification
| FIXTURLASER Laser Kit – THE COMPLETE SYSTEM | |
| Case | |
| Weight including all standard parts: | 7,7 kg (17 lbs) |
| Dimension: | 415 mm x 325 mm x 180 mm (16 in x 13 in x 7 in) |
| Display Unit | |
| Weight: | 1,2 kg (2,6 lbs) with battery |
| Dimensions: | 124 mm x 158 mm x 49 mm (4,9 in x 6,2 in x 1,9 in) |
| Environmental protection: | IP 65 (Dust tight and protected against water jets) |
| Display size: | 6,5” (165 mm) diagonal (133 x 100 mm) |
| Gyroscope: | 6-Axis MEMS Inertial Motion Sensor with drift compensation and automatic field calibration. |
| Operating time: | 10 hours of continous use (with 50% LCD backlight) |
| Xpress Battery Charging time (system off, room temperature): | 1 hour of charge gives you 6 hours of operating time |
| Sensor Units | |
| Weight: | 192 g (6,8 oz) with battery |
| Dimensions: | 92 mm x 77 mm x 33 mm (3,6 in x 3,0 in x 1,3 in) |
| Environmental protection: | IP 65 (dust tight and protected against water jets) |
| Measurement distance: | Up to 10 m |
| Detector: | 2nd generation sensor |
| Detector length: | 30 mm (1,2 in) |
| Detector resolution: | 1 µm |
| Measurement accuracy: | 0,3% ± 7 µm |
| Gyroscope: | 6-Axis MEMS Inertial Motion Sensor with drift compensation and automatic field calibration |
| Operating time: | 17 hours continuous use (measuring) |
| Laser safety | |
| Shaft brackets | |
| Shaft diameter: | Ø 20-450 mm (3/4”-18”) |
| Rods: | 4 pcs 85 mm and 4 pcs 160 mm (extendable to 245 mm) |
