Product Description
Two transmitters with visible red laser line
The Fixturlaser PAT comes with two line laser transmitters, each equipped with two spring loaded guides which fit into the pulley grooves. The use of two laser transmitters with integrated targets makes it very easy to find out what kind of alignment that is required. Parallel offset, angular error and twist is instantly visible to the operator. Within a few minutes the operator can determine if the machine requires alignment or not.
Mounting of the transmitters
The Fixturlaser PAT units are very easily mounted on the pulleys. The spring action probe finds the center of the belt groove. The industrial built-in magnets snap the units to the pulley in a perfect fit. The Fixturlaser PAT is equipped with various sized removable guides to fit standard sheave sizes A-E (6 mm – 40 mm). Additional guides for alignment of timing belts are available as accessories.
The alignment process with the Fixturlaser PAT
The visible red laser line makes it easy to determine the position of your belt driven machines.
The alignment process is as easy as the mounting. Just turn on the lasers and look at the opposite mounted unit. The laser draws a line on the target label as in the illustration to the left. If necessary, adjust your machine position until the laser lines are aligned with the centre mark on both units.
Technical Data
Technical Specification
| Fixturlaser PAT – COMPLETE SYSTEM | |
| Weight (incl. all standard parts): | 1,5 kg (3,3 lbs) |
| Storage Temperature: | -20 to 70°C (-4 to 158°F) |
| Case | |
| Material: | High Impact ABS Plastic |
| Sealing: | Dust, water (5m/16 feet), and air tight with air pressure compensation valve |
| Drop Test: | 3 m (10 feet) on to concrete floor |
| Dimensions: | 250 x 180 x 80 mm (9,84 x 7,09 x 3,15 inch) |
| Measuring units | |
| Housing Material: | Extruded aluminum (molded PA cover) |
| Operating Temp: | 0 to 40°C (32 to 104°F) |
| Relative Humidity: | 10 – 90% |
| Weight: | 340 g (12 oz) |
| Dimensions: | 61 x 77 x 61 mm (2,4 x 3 x 2,4 in) |
| Environmental Protection: | IP 65 |
| Laser: | 630 – 675 nm class II diode laser |
| Laser Line Fan Angle: | 90° |
| Laser Power: | < 1 mW |
| Measurement Distance: | 50 mm – 6000 mm (1,97 – 236,22 in) |
| Measurement Accuracy: | Better than 0,5 m (0,02 in) or 0,2 degrees |
| Pulley Diameter Range: | From 75 mm (2,95 in) and larger (standard) |
| Pulley Belt Groove Width: | 6 mm – 40 mm (0,23 – 1,57 in) (standard) |
| Power Supply: | 2 pcs of LR03 (AAA)1,5 V per unit |
| Operating time: | 20 hours of continuous operation |
| Laser Safety: |
