Valve islands Cabinet Version Series HC
Multipole connection with 25 or 37 pins
Valve functions: 2×2/2, 2×3/2, 5/2, 5/3 CC
Valve functions: 2×2/2, 2×3/2, 5/2, 5/3 CC
In applications which are subject to washing or operate in particularly dirty environments, having a specific solution represents a distinct advantage.
With the Series HC it is possible to exploit the subbase and relative perimetric seal to close the passage window of all tubings.
n this way the external environment is isolated from the internal part of the cabinet, guaranteeing a high protection level against solid and liquid particles that, upon entering, may damage the components.
With the Series HC it is possible to exploit the subbase and relative perimetric seal to close the passage window of all tubings.
n this way the external environment is isolated from the internal part of the cabinet, guaranteeing a high protection level against solid and liquid particles that, upon entering, may damage the components.
All pneumatic connections are immediately available avoiding operations for the installation of panel mount fittings.
Series HC uses the same valve functions as those available in Series HN.
Thanks to a particularly flexible use of the valve positions, different configurations can be realized (further details can be found on the following pages regarding the correct management of electrical signals).
General Data
<tbody “=””>
| PNEUMATIC SECTION | |
| Valve construction | spool with seals |
| Valve functions | 5/2 monostable and bistable 5/3 CC 2 x 2/2 NO 2 x 2/2 NC 1 x 2/2 NC+ 1 x NO 2 x 3/2 NC 2 x 3/2 NO 1 x 3/2 NC+ 1 x 3/2 NO |
| Materials | spool in aluminium spool seals in HNBR other seals in NBR cartridges in brass body and end covers in technopolymer subbases in aluminium |
| Connections | Inlets 2 and 4, size 10.5mm: M7, tube Ø 4, tube Ø 6 Inlets 2 and 4, size 21mm: G1/4, tube Ø 6, tube Ø 8, tube Ø 10 Supply 1: G3/8, tube Ø 8, tube Ø 10, tube Ø 12 Exhausts 3 and 5: G1/4, tube Ø 10 (6512 10-1/4-M) |
| Temperature [°C] | 0 ÷ 50°C |
| Air specifications | Filtered compressed air, non lubricated, class 6.4.4 according to ISO 8573-1:2010. If lubrication is necessary, please only use oils with maximum viscosity of 32 Cst and the version with external servo-pilot supply. The servo-pilot supply air quality class must be 6.4.4 according to ISO 8573-1:2010 (do not lubricate). |
| Valve sizes | 10.5mm 21mm |
| Working pressure | -0.9 ÷ 10 bar |
| Pilot pressure [bar] | 3 ÷ 7 bar 4.5 ÷ 7 bar (with working pressure exceeding 6 bar for the versions 2×2/2 and 2×3/2) |
| Flow rate | 400 Nl/min (10.5mm) 700 Nl/min (21mm) |
| Mounting position | any position |
| Protection class | IP65 |
| ELECTRICAL SECTION | |
| Sub-D connector | 25 or 37 pins |
| Max. absorption | 0.8 A (with Sub-D connector 25 pins) 1 A (with Sub-D connector 37 pins) |
| Supply voltage [Vdc] | 24 V DC +/-10% |
| Max. number of coils to operate | Size 10.5 mm: 24 coils on 12 valve positions (with Sub-D connector 25 pins) 32 coils on 32 valve positions (with Sub-D connector 37 pins) Size 21mm: 24 coils on 6 valve positions (with Sub-D connector 25 pins 2 coils on 16 valve positions (with Sub-D connector 37 pins) Sizes 10.5 mm and 21 mm simultaneously |
| Valve signalling | Yellow LED |
Download
Instruction sheets
